Specifications

Model 1450
Frame All welded tubular steel construction
Assembly Cat. I or II 3-pt hitch or opt. skid steer mount
Mast 12" (305 mm) wide track
Hammer weight 310 lb (141 kg)
Impact at full stroke 100,000 lb (45,360 kg)
Hydraulic requirements 6-8 gpm @ 300-500 rpm (22.7-30.3 lpm @ 300-500 rpm)
Maximum hammer height Standard lift 105" (2.67 m)
Minimum hammer height 43" (1090 mm)
Maximum hammer stroke 62" (1570 mm)
Leveling adjustment 2" x 8" cylinder on mast (1) / 2" x 8" cylinder on hammer pivot (1)
Angle of tilt, from vertical Front / Back: Fore 15° / Aft 35°, Side tilt: Left 22° / Right 22°
Hydrualic pump 12 gpm @ rated speed
Basic shipping weight 1135 lb (515 kg)


Model 2400, Engine or PTO Drive
Frame All welded tubular steel construction
In frame counterweight box 15" x 15" x 25" – 3.2 cu. ft. (92L)
Wheel track width 69" (1750 mm)
Wheel rims 15" (381 mm) (6.70 x 15 4-ply bias tires optional)
Wheel bearings Tapered roller
Mast 12" (305 mm) wide track
Hammer weight 310 lb (141 kg) empty, up to 700 lb (318 kg) ballasted
Impact at full stroke 100,000 lb (45,360 kg)*
Maximum hammer height Standard lift 105" (2.67 m), 128" (3.25 m) with optional mast extension
Minimum hammer height 43" (1090 mm), 66" (1676 mm) with optional mast extension
Maximum hammer stroke 62" (1570 mm)
In & out hammer slide 16" (410 mm)
Hammer tilt, from vertical Fore 20° / Aft 15°, Side Tilt: Left 40° / Right 22°
Basic shipping weight PTO: 1190 lb (540 kg), Engine: 1300 lb (590 kg)


*Impact lb are based on an 8" diameter post driven into packed clay soil with non ballasted hammer. Impact increases proportionally with ballast in hammer.